dmesg - Intel Xeon E31225
microcode: microcode updated early to revision 0x2f, date = 2019-02-17
Linux version 5.15.0-100-generic (buildd@lcy02-amd64-014) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.2) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #110~20.04.1-Ubuntu SMP Tue Feb 13 14:25:03 UTC 2024 (Ubuntu 5.15.0-100.110~20.04.1-generic 5.15.143)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf1f9fff] usable
BIOS-e820: [mem 0x00000000cf1fa000-0x00000000cf23dfff] reserved
BIOS-e820: [mem 0x00000000cf23e000-0x00000000cf5b6fff] usable
BIOS-e820: [mem 0x00000000cf5b7000-0x00000000cf5e6fff] reserved
BIOS-e820: [mem 0x00000000cf5e7000-0x00000000cf7e6fff] ACPI NVS
BIOS-e820: [mem 0x00000000cf7e7000-0x00000000cf7fefff] ACPI data
BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000032dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. Precision T1600/06NWYK, BIOS A21 07/05/2018
tsc: Fast TSC calibration using PIT
tsc: Detected 3093.100 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x32e000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 12256M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
last_pfn = 0xcf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f21d0-0x000f21df]
RAMDISK: [mem 0x2f21f000-0x33906fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE300 000024 (v02 DELL )
ACPI: XSDT 0x00000000CF7FDE18 00007C (v01 DELL CBX3 06222004 MSFT 00010013)
ACPI: FACP 0x00000000CF787D98 0000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
ACPI: DSDT 0x00000000CF771018 007581 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
ACPI: FACS 0x00000000CF7E4E40 000040
ACPI: FACS 0x00000000CF7E4D40 000040
ACPI: APIC 0x00000000CF7FCF18 0000CC (v02 DELL CBX3 06222004 MSFT 00010013)
ACPI: TCPA 0x00000000CF7E5D18 000032 (v02 00000000 00000000)
ACPI: SSDT 0x00000000CF788A98 0002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
ACPI: MCFG 0x00000000CF7E5C98 00003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
ACPI: HPET 0x00000000CF7E5C18 000038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
ACPI: BOOT 0x00000000CF7E5B98 000028 (v01 DELL CBX3 06222004 AMI 00010013)
ACPI: SSDT 0x00000000CF77E818 0007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
ACPI: SSDT 0x00000000CF77D018 000996 (v01 PmRef CpuPm 00003000 INTL 20090903)
ACPI: DMAR 0x00000000CF7E4A18 0000B0 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: SLIC 0x00000000CF786C18 000176 (v03 DELL CBX3 06222004 MSFT 00010013)
ACPI: Reserving FACP table memory at [mem 0xcf787d98-0xcf787e8b]
ACPI: Reserving DSDT table memory at [mem 0xcf771018-0xcf778598]
ACPI: Reserving FACS table memory at [mem 0xcf7e4e40-0xcf7e4e7f]
ACPI: Reserving FACS table memory at [mem 0xcf7e4d40-0xcf7e4d7f]
ACPI: Reserving APIC table memory at [mem 0xcf7fcf18-0xcf7fcfe3]
ACPI: Reserving TCPA table memory at [mem 0xcf7e5d18-0xcf7e5d49]
ACPI: Reserving SSDT table memory at [mem 0xcf788a98-0xcf788d90]
ACPI: Reserving MCFG table memory at [mem 0xcf7e5c98-0xcf7e5cd3]
ACPI: Reserving HPET table memory at [mem 0xcf7e5c18-0xcf7e5c4f]
ACPI: Reserving BOOT table memory at [mem 0xcf7e5b98-0xcf7e5bbf]
ACPI: Reserving SSDT table memory at [mem 0xcf77e818-0xcf77efd9]
ACPI: Reserving SSDT table memory at [mem 0xcf77d018-0xcf77d9ad]
ACPI: Reserving DMAR table memory at [mem 0xcf7e4a18-0xcf7e4ac7]
ACPI: Reserving SLIC table memory at [mem 0xcf786c18-0xcf786d8d]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000032dffffff]
NODE_DATA(0) allocated [mem 0x32dfce000-0x32dff7fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000032dffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000090fff]
node 0: [mem 0x0000000000100000-0x00000000cf1f9fff]
node 0: [mem 0x00000000cf23e000-0x00000000cf5b6fff]
node 0: [mem 0x00000000cf7ff000-0x00000000cf7fffff]
node 0: [mem 0x0000000100000000-0x000000032dffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000032dffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 111 pages in unavailable ranges
On node 0, zone DMA32: 68 pages in unavailable ranges
On node 0, zone DMA32: 584 pages in unavailable ranges
On node 0, zone Normal: 2048 pages in unavailable ranges
On node 0, zone Normal: 8192 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x408
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 16 CPUs, 12 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x00091000-0x00091fff]
PM: hibernation: Registered nosave memory: [mem 0x00092000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xcf1fa000-0xcf23dfff]
PM: hibernation: Registered nosave memory: [mem 0xcf5b7000-0xcf5e6fff]
PM: hibernation: Registered nosave memory: [mem 0xcf5e7000-0xcf7e6fff]
PM: hibernation: Registered nosave memory: [mem 0xcf7e7000-0xcf7fefff]
PM: hibernation: Registered nosave memory: [mem 0xcf800000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xffbfffff]
PM: hibernation: Registered nosave memory: [mem 0xffc00000-0xffc1ffff]
PM: hibernation: Registered nosave memory: [mem 0xffc20000-0xffffffff]
[mem 0xcf800000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 3085598
Policy zone: Normal
Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-100-generic", will be passed to user space.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 12116268K/12538896K available (16393K kernel code, 4390K rwdata, 10856K rodata, 3356K init, 18724K bss, 422368K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 50186 entries in 197 pages
ftrace: allocated 197 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20210730
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f010da
DMAR: RMRR base: 0x000000cf5c6000 end: 0x000000cf5d5fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c95d1a9267, max_idle_ns: 440795297549 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.20 BogoMIPS (lpj=12372400)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
MMIO Stale Data: Unknown: No mitigations
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Freeing SMP alternatives memory: 40K
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1057
smpboot: CPU0: Intel(R) Xeon(R) CPU E31225 @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
signal: max sigframe size: 1776
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 4
smpboot: Total of 4 processors activated (24744.80 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0xcf5e7000-0xcf7e6fff] (2097152 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 16:05:23, date: 2024-03-11
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1710173123.052:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0xf3 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95BD41145800 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95BD4095F000 000303 (v01 PmRef ApIst 00003000 INTL 20090903)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95BD40203C00 000119 (v01 PmRef ApCst 00003000 INTL 20090903)
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
pci 0000:00:00.0: [8086:0108] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:010d] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe4bb0000-0xe4bb000f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe4b00000-0xe4b1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe4b80000-0xe4b80fff]
pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xe4b70000-0xe4b703ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe4b60000-0xe4b63fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xe4b50000-0xe4b503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1c56] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0x4090-0x4097]
pci 0000:00:1f.2: reg 0x14: [io 0x4080-0x4083]
pci 0000:00:1f.2: reg 0x18: [io 0x4070-0x4077]
pci 0000:00:1f.2: reg 0x1c: [io 0x4060-0x4063]
pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe4b40000-0xe4b407ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe4b30000-0xe4b300ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
pci 0000:01:00.0: [10de:0a23] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe3000000-0xe3ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xe4000000-0xe407ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xe4080000-0xe4083fff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xe3000000-0xe40fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe4afffff]
pci 0000:00:1c.2: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
pci_bus 0000:05: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfeafffff window] (subtractive decode)
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 5
ACPI: PCI: Interrupt link LNKC configured for IRQ 10
ACPI: PCI: Interrupt link LNKD configured for IRQ 10
ACPI: PCI: Interrupt link LNKE configured for IRQ 3
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 11
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf1fa000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf5b7000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
e820: reserve RAM buffer [mem 0x32e000000-0x32fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xe3000000-0xe40fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe4afffff]
pci 0000:00:1c.2: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xe3000000-0xe40fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xe4100000-0xe4afffff]
pci_bus 0000:04: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0xd0000000-0xfeafffff window]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000cb1fa000-0x00000000cf1fa000] (64MB)
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.34)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 16, io mem 0xe4b70000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.15.0-100-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 17, io mem 0xe4b50000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.15.0-100-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0f13:MOU] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2024-03-11T16:05:23 UTC (1710173123)
rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram
i2c_dev: i2c /dev entries driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe1000000, mapped to 0x(____ptrval____), using 1216k, total 1216k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
Freeing initrd memory: 72608K
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
microcode: sig=0x206a7, pf=0x2, revision=0x2f
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (390776013, 199209)->(394043601, -3068379)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: d0968e93f7dce934a04d185b227aa8ec23511fc9'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
blacklist: Loading compiled-in revocation X.509 certificates
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
zswap: loaded using pool lzo/zbud
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: d0968e93f7dce934a04d185b227aa8ec23511fc9'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 0:19:85
event_source uncore_cbox_3: hash matches
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 3356K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 1432K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.15.0-100-generic
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20210730/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210730/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210730/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210730/utaddress-204)
ACPI: OSL: Resource conflict; ACPI support missing from driver?
lpc_ich: Resource conflict(s) found affecting gpio_ich
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-0: 4/4 memory slots populated (from DMI)
usb 1-1: new high-speed USB device number 2 using ehci-pci
i2c i2c-0: Successfully instantiated SPD at 0x50
i2c i2c-0: Successfully instantiated SPD at 0x51
i2c i2c-0: Successfully instantiated SPD at 0x52
i2c i2c-0: Successfully instantiated SPD at 0x53
usb 2-1: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xe4b40000 port 0xe4b40100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xe4b40000 port 0xe4b40180 irq 28
ata3: SATA max UDMA/133 abar m2048@0xe4b40000 port 0xe4b40200 irq 28
ata4: SATA max UDMA/133 abar m2048@0xe4b40000 port 0xe4b40280 irq 28
ata5: DUMMY
ata6: DUMMY
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 18:03:73:d2:7e:1b
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 8041FF-0FF
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: INTEL SSDSA2BW160G3L, 4PC1LE04, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 32)
ata3.00: configured for UDMA/133
ata4.00: ATAPI: HL-DT-ST DVD+/-RW GH70N, A101, max UDMA/100
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
ata4.00: configured for UDMA/100
ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
ata2.00: ATA Identify Device Log not supported
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: ATA Identify Device Log not supported
ata2.00: configured for UDMA/133
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
usb 2-1.1: new full-speed USB device number 3 using ehci-pci
usb 1-1.4: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 2.00
usb 1-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-1.4: Product: DataTraveler 3.0
usb 1-1.4: Manufacturer: Kingston
usb 1-1.4: SerialNumber: 4CEDFB74A3581731799B0050
usb-storage 1-1.4:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-1.4:1.0
usbcore: registered new interface driver usb-storage
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=22.00
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB Receiver
usb 2-1.1: Manufacturer: Logitech
hid: raw HID events driver (C) Jiri Kosina
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1118 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2BW16 LE04 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: Enabling discard_zeroes_data
sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 >
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdc] Attached SCSI disk
scsi 3:0:0:0: CD-ROM HL-DT-ST DVD+-RW GH70N A101 PQ: 0 ANSI: 5
tsc: Refined TSC clocksource calibration: 3092.973 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95594edb3, max_idle_ns: 440795220223 ns
clocksource: Switched to clocksource tsc
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1.2: new low-speed USB device number 4 using ehci-pci
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
e1000e 0000:00:19.0 eno1: renamed from eth0
usbcore: registered new interface driver uas
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C52F.0001/input/input5
hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C52F.0002/input/input6
usb 2-1.2: New USB device found, idVendor=04ca, idProduct=0050, bcdDevice= 1.04
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Multimedia Keyboard
usb 2-1.2: Manufacturer: Lite-On Technology Corp.
input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:04CA:0050.0003/input/input9
hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
hid-generic 0003:04CA:0050.0003: input,hidraw2: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input0
input: Lite-On Technology Corp. USB Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:04CA:0050.0004/input/input10
logitech-djreceiver 0003:046D:C52F.0001: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
input: Lite-On Technology Corp. USB Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:04CA:0050.0004/input/input11
hid-generic 0003:04CA:0050.0004: input,hidraw3: USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input1
logitech-djreceiver 0003:046D:C52F.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
logitech-djreceiver 0003:046D:C52F.0002: device of type eQUAD step 4 DJ (0x04) connected on slot 1
input: Logitech Wireless Mouse PID:4008 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C52F.0002/0003:046D:4008.0005/input/input12
input: Logitech Wireless Mouse PID:4008 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C52F.0002/0003:046D:4008.0005/input/input13
hid-generic 0003:046D:4008.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4008] on usb-0000:00:1d.0-1.1/input1:1
input: Logitech M185/M225 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C52F.0002/0003:046D:4008.0005/input/input17
logitech-hidpp-device 0003:046D:4008.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech M185/M225] on usb-0000:00:1d.0-1.1/input1:1
logitech-hidpp-device 0003:046D:4008.0005: HID++ 2.0 device connected.
scsi 6:0:0:0: Direct-Access Kingston DataTraveler 3.0 0000 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdd] 242155521 512-byte logical blocks: (124 GB/115 GiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 < sdd5 >
sd 6:0:0:0: [sdd] Attached SCSI removable disk
fbcon: Taking over console
Console: switching to colour frame buffer device 80x30
EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.23 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: crng init done
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Mounting snaps.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module chromeos_pstore...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module pstore_blk...
systemd[1]: Starting Load Kernel Module pstore_zone...
systemd[1]: Starting Load Kernel Module ramoops...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: modprobe@efi_pstore.service: Succeeded.
systemd[1]: Finished Load Kernel Module efi_pstore.
systemd[1]: modprobe@pstore_zone.service: Succeeded.
systemd[1]: Finished Load Kernel Module pstore_zone.
systemd[1]: modprobe@pstore_blk.service: Succeeded.
systemd[1]: Finished Load Kernel Module pstore_blk.
systemd[1]: [email protected]: Succeeded.
systemd[1]: Finished Load Kernel Module ramoops.
EXT4-fs (sdd5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: modprobe@chromeos_pstore.service: Succeeded.
systemd[1]: Finished Load Kernel Module chromeos_pstore.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Started Journal Service.
systemd-journald[275]: Received client request to flush runtime journal.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
loop0: detected capacity change from 0 to 112528
loop1: detected capacity change from 0 to 113992
loop2: detected capacity change from 0 to 8
lp0: using parport0 (polling).
loop3: detected capacity change from 0 to 3976
loop4: detected capacity change from 0 to 493152
loop5: detected capacity change from 0 to 187776
loop6: detected capacity change from 0 to 101960
loop7: detected capacity change from 0 to 130880
loop9: detected capacity change from 0 to 447264
loop8: detected capacity change from 0 to 55480
loop10: detected capacity change from 0 to 127160
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
cryptd: max_cpu_qlen set to 1000
EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
at24 0-0050: supply vcc not found, using dummy regulator
at24 0-0050: 256 byte spd EEPROM, read-only
at24 0-0051: supply vcc not found, using dummy regulator
at24 0-0051: 256 byte spd EEPROM, read-only
at24 0-0052: supply vcc not found, using dummy regulator
at24 0-0052: 256 byte spd EEPROM, read-only
at24 0-0053: supply vcc not found, using dummy regulator
at24 0-0053: 256 byte spd EEPROM, read-only
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: RAPL package-0 domain package locked by BIOS
Console: switching to colour dummy device 80x25
nouveau 0000:01:00.0: vgaarb: deactivate vga console
nouveau 0000:01:00.0: NVIDIA GT216 (0a5180a2)
nouveau 0000:01:00.0: bios: version 70.16.4f.00.05
nouveau 0000:01:00.0: fb: 1024 MiB DDR2
nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00020030
nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
nouveau 0000:01:00.0: DRM: DCB outp 02: 01011310 00000000
nouveau 0000:01:00.0: DRM: DCB outp 03: 02022362 00020010
nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
nouveau 0000:01:00.0: DRM: allocated 1360x768 fb: 0x70000, bo 000000001c027988
fbcon: nouveaudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
audit: type=1400 audit(1710173143.459:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=817 comm="apparmor_parser"
audit: type=1400 audit(1710173143.471:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1710173143.471:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=816 comm="apparmor_parser"
audit: type=1400 audit(1710173143.475:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=814 comm="apparmor_parser"
audit: type=1400 audit(1710173143.487:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=813 comm="apparmor_parser"
audit: type=1400 audit(1710173143.495:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=823 comm="apparmor_parser"
audit: type=1400 audit(1710173143.515:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=825 comm="apparmor_parser"
audit: type=1400 audit(1710173143.515:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=825 comm="apparmor_parser"
audit: type=1400 audit(1710173143.519:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=824 comm="apparmor_parser"
audit: type=1400 audit(1710173143.519:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=824 comm="apparmor_parser"
loop11: detected capacity change from 0 to 8
e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled
loop11: detected capacity change from 0 to 151992
loop12: detected capacity change from 0 to 26472
kauditd_printk_skb: 27 callbacks suppressed
audit: type=1400 audit(1710198441.681:39): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/7264/usr/lib/snapd/snap-confine" pid=40866 comm="apparmor_parser"
audit: type=1400 audit(1710198441.681:40): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/7264/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=40866 comm="apparmor_parser"
audit: type=1400 audit(1710198441.949:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.hook.configure" pid=40869 comm="apparmor_parser"
audit: type=1400 audit(1710198442.345:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.snap-store" pid=40870 comm="apparmor_parser"
audit: type=1400 audit(1710198442.361:43): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=40871 comm="apparmor_parser"
audit: type=1400 audit(1710198442.573:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=40872 comm="apparmor_parser"
audit: type=1400 audit(1710198442.801:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.snap-store" pid=40868 comm="apparmor_parser"
loop13: detected capacity change from 0 to 1017816
audit: type=1400 audit(1710198918.475:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/7264/usr/lib/snapd/snap-confine" pid=41198 comm="apparmor_parser"
audit: type=1400 audit(1710198918.475:47): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/7264/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=41198 comm="apparmor_parser"
audit: type=1400 audit(1710198918.719:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.hook.configure" pid=41201 comm="apparmor_parser"
audit: type=1400 audit(1710198919.267:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=41203 comm="apparmor_parser"
audit: type=1400 audit(1710198919.271:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.snap-store" pid=41202 comm="apparmor_parser"
audit: type=1400 audit(1710198919.859:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.snap-store" pid=41200 comm="apparmor_parser"
audit: type=1400 audit(1710198919.867:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=41204 comm="apparmor_parser"
perf: interrupt took too long (2525 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
usb 2-1.7: new high-speed USB device number 5 using ehci-pci
usb 2-1.7: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= c.00
usb 2-1.7: New USB device strings: Mfr=7, Product=8, SerialNumber=9
usb 2-1.7: Product: SAMSUNG_Android
usb 2-1.7: Manufacturer: SAMSUNG
usb 2-1.7: SerialNumber: R58MC1LPPLX
cdc_acm 2-1.7:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
perf: interrupt took too long (3163 > 3156), lowering kernel.perf_event_max_sample_rate to 63000
process 'john-the-ripper-1.8.0/john-c7cacb14f5ed20aca56a52f1ac0cd4d5035084b6/run/john' started with executable stack